Home / Product / Taillights Mold / Dongfeng Sokon Tail Lamp Photometric Lens

Dongfeng Sokon Tail Lamp Photometric Lens

Dongfeng Sokon Tail Lamp Photometric Lens

Part Material: PMMA
Mold Steel: 2343
Key Requirement: Stable three-shot molding with a high-gloss mirror-like finish and precise optical texture replication
Mold Life: 500,000+ Shots
DFM Review: 10 Days
Mold Design: 10 Days After Data Freeze
Mold Manufacturing: 70 Days After Material Preparation Instruction Issued
T0 Trial: Based on Mold Complexity
Modification & Validation: According to Trial Result
Shipment: After Sample Approval
Reports: DFM, Mold Flow, CMM, Trial Report
Application: Tier 1 Supplier, Dongfeng Sokon

  • Challenge and Solution
  • Challenge:
    The main challenge was to achieve three different technical requirements on one part at the same time. The product required a bright mirror-like appearance in specific areas, precise optical texture in the functional regions, and stable three-shot molding performance throughout the entire process. It was necessary to ensure accurate positioning and bonding between the three shots while also maintaining high surface quality and clear texture replication. Any instability in mold alignment, material flow, temperature control, or molding parameters could lead to defects such as poor bonding, flow marks, weld lines, gloss inconsistency, texture distortion, or deformation.

    Solution:
    We optimized the three-shot mold structure and injection sequence to ensure accurate positioning and reliable bonding between different materials. High-precision machining and fine polishing were applied to the mirror-finish areas to achieve the required bright surface effect. For the optical texture areas, the mold surface and processing parameters were carefully controlled to ensure accurate texture replication and stable optical performance. In addition, the gate layout, cooling system, and molding parameters were optimized through mold trials to improve filling balance, reduce defects, and ensure consistent appearance and molding quality.

  • Why Choose Us
  • Why Choose Renxin for Dongfeng Sokon Tail Lamp Photometric Lens

    ● Experience in automotive lighting mold development since 2013
    ● Support for DFM, mold flow analysis, optical simulation and trial validation
    ● Suitable for OEM, Tier-1, and customized automotive lighting projects
    ● Precision machining, polishing, fitting and inspection capabilities
    ● Project management from design review to sample approval
  • Send Your Drawing for Free DFM Review
  • Share your 2D/3D drawing, material requirements, annual volume and project timeline. Our engineering team will review the manufacturability and provide mold solution suggestions.

About
Taizhou Renxin Mould Co., Ltd.

Founded in 2013, Renxin Mould specializes in the design and manufacture of automotive lighting molds. Our tooling scope includes lenses, light guides, bezels, housings and other lamp components, with two-shot, three-color and overmolding mold solutions. Engineering support includes DFM review, mold-flow analysis, mold design, machining, fitting and mold trials according to project requirements.

For Dongfeng Sokon Tail Lamp Photometric Lens projects, the engineering discussion covers part geometry, the specified resin, optical or appearance surfaces and assembly interfaces. The mold structure, surface finish and inspection scope are reviewed against the confirmed design and production conditions.

Support for Dongfeng Sokon Tail Lamp Photometric Lens covers the agreed tooling scope, project documents and mold trial requirements. Drawing revisions, inspection items and sample acceptance criteria guide communication through design review, manufacture and trial approval.